Starna Cell Accessories |
||||||||
|
||||||||
| Cell holder short path Length | 
|
|||||||
| The cell holder Type CH/2049 is designed for use with Types 20 & 49 with path lengths of 3mm or less. Exterior dimensions are 12.5 x 12.5 x 52mm. | ||||||||
| Type No. | Description | |||||||
| CH/2049 | Cell holder, short path length | |||||||
|
|
||||||||
| Cell holder, Long path length |  |
|||||||
| Cell holders Type CH/50 and CH/100 are for rectangular cells up to 50 and 100mm path lengths respectively. The CH/34/100 will fit 50mm or 100mm Type 34. All are complete with a 75mm x 50mm back plate to fit standard infrared instrument holders. | ||||||||
| Type No. | Description | |||||||
| CH/1/50
CH/1/100 CH/34/100 |
Up
to 50mm cell holder Up to 100mm cell holder 50/100mm T34 holder |
|||||||
|
|
||||||||
| Cell compartment spacers | 
|
|||||||
| Aluminium
spacers, black anodised, available in three sizes for use with 1, 2, and 5mm path length cells, supporting them in a normal 12.5 x 12.5mm holder where there is no cell holder path length adjustment facility. |
||||||||
| Type No. | Description | |||||||
| SPA/1
SPA/2 SPA/5 |
for
1mm path length cells for 2mm path length cells for 5mm path length cells |
|||||||
|
|
||||||||
| Magnetic stir bars |  |
|||||||
| PTFE
coated magnetic stir bars, available in packs of ten to fit the MS (magnetic stirring) . Types 18/MS and 28/MS need the MSB/6x1.5 to allow the stirring bar to enter the narrow sample compartment. |
||||||||
| Type No. | Dimensions | |||||||
| MSB/6x1.5/10 MSB/6x3/10 |
6mm long x 1.5mm diameter 6mm long x 3mm diameter |
|||||||
|
|
||||||||
| Quartz block inserts | 
|
|||||||
| Precision polished FarUV quartz inserts are intended for use with Standard Rectangular 10mm path length cells (see page 5), when a reduced path length is required without using a different cell. Four different size combinations, each provide two different path lengths as indicated, by rotating the insert through ninety degrees. | ||||||||
